manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 118 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 118

3-26

Convenient features of your vehicle

The Driver Position Memory System
is provided to store and recall the fol-
lowing memory settings with a sim-
ple button operation.
- Driver's seat position (Power seat)
- Side view mirror position
- Instrument panel illumination

intensity

- Head Up Display (HUD) position

and brightness (if equipped)

Information

• If the battery is disconnected, the

memory settings will be erased.

• If the Driver Position Memory

System does not operate normally,
have the system checked by an
authorized HYUNDAI dealer.

Storing Positions into Memory 

1. Shift to P (Park) while the ignition

switch is in the ON position.

2. Adjust the driver's seat position,

side view mirror position, instru-
ment panel illumination intensity
and head-up display height/bright-
ness to positions comfortable for
the driver.

3. Press the SET button. The system

will beep once and notify you
"Press button to save settings" on
the cluster LCD display.

4. Press one of the memory buttons

(1 or 2) within 4 seconds. The sys-
tem will beep twice when the mem-
ory has been successfully stored.

5. "Driver 1 (or 2) settings saved" will

appear on the cluster LCD display.

i

D

DR

RIIV

VE

ER

R  P

PO

OS

SIIT

TIIO

ON

N  M

ME

EM

MO

OR

RY

Y  S

SY

YS

ST

TE

EM

M  ((IIF

F  E

EQ

QU

UIIP

PP

PE

ED

D))

OTMA048007

Never attempt to operate the
driver position memory system
while the vehicle is moving.
This could result in loss of con-
trol, and an accident causing
death, serious injury, or property
damage.

WARNING  

TMa CAN-E 3A(~114).qxp  5/21/2019  11:10 AM  Page 26

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments