Home
/
Hyundai
/
2020 SANTA FE
/
Manual

Hyundai 2020 SANTA FE, Manual, Page: 47 / 555

Share

Page: 47 / 555

Hyundai 2020 SANTA FE Manual Download Page 47

2-26

Safety system of your vehicle

Seat Belt Warning Light

Seat belt warning light

Driver's seat belt warning

As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you place the ignition switch to the
ON position regardless of belt fas-
tening. At this time, if the seat belt is
not fastened a warning chime will
sound for 6 seconds.
If you continue not to fasten the seat
belt and you drive over 9 km/h (6 mph),
the warning light will stay illuminated.

If you continue not to fasten the seat
belt and you drive over 20 km/h (12
mph) the seat belt warning chime will
sound for approximately 100 seconds
and the corresponding warning light
will blink.
If you unfasten the seat belt while
driving under 20 km/h (12 mph), the
seat belt warning light will illuminate
until the seat belt is fastened.
If you unfasten the seat belt while
driving over 20 km/h (12 mph), the
seat belt warning chime will sound for
approximately 100 seconds and the
corresponding warning light will blink.

Damaged seat belts and seat
belt assemblies will not operate
properly. Always replace:

•

Frayed, contaminated, or dam-
aged webbing

•

Damaged hardware

•

The entire seat belt assembly
after it has been worn in an
accident, even if damage to
webbing or assembly is not
apparent

WARNING

OTM038037

TMa CAN-E 2.qxp 2/1/2019 4:13 PM Page 26

«
...
45
46
47
48
49
...
»

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments