manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual

Discover the feature-packed Hyundai 2020 SANTA FE with our comprehensive manual, available for free download at manualshive.com. This user manual provides in-depth information to optimize your driving experience, ensuring you make the most of this exceptional SUV. Download now and unleash the full potential of your Hyundai 2020 SANTA FE.

Share
Download
background image

3-67

Con

v

enient f

e

atur

es of y

o

ur v

ehicle

3

•

Do not get back into a vehicle
once you have begun refuel-
ing. You can generate a build-
up of static electricity by
touching, rubbing or sliding
against any item or fabric
capable of producing static
electricity. Static electricity
discharge can ignite fuel
vapors causing a fire. If you
must re-enter the vehicle, you
should once again eliminate
potentially dangerous static
electricity discharge by touch-
ing a metal part of the vehicle,
away from the fuel filler neck,
nozzle or other gasoline
source, with your bare hand.

•

When using an approved
portable fuel container, be
sure to place the container on
the ground prior to refueling.
Static electricity discharge
from the container can ignite
fuel vapors causing a fire.

•

Do not over-fill or top-off your
vehicle tank, which can cause
gasoline spillage.

•

If a fire breaks out during refu-
eling, leave the vicinity of the
vehicle, and immediately con-
tact the manager of the gas
station and then contact the
local fire department. Follow
any safety instructions they
provide.

•

If pressurized fuel sprays out,
it can cover your clothes or
skin and thus subject you to
the risk of fire and burns.
Always remove the fuel cap
carefully and slowly. If the cap
is venting fuel or if you hear a
hissing sound, wait until the
condition stops before com-
pletely removing the cap.

•

Always check that the fuel cap
is installed securely to pre-
vent fuel spillage in the event
of an accident.

Once refueling has begun,
contact between your bare
hand and the vehicle should
be maintained until the filling
is complete.

•

Use only approved portable
plastic fuel containers designed
to carry and store gasoline.

•

When refueling, always move
the shift lever to the P (Park)
position (for automatic trans-
mission/dual clutch transmis-
sion), set the parking brake,
and place the ignition switch
to the LOCK/OFF position.
Sparks produced by electrical
components related to the
engine can ignite fuel vapors
causing a fire.

•

Do not use matches or a
lighter and do not smoke or
leave a lit cigarette in your
vehicle while at a gas station,
especially during refueling.

TMa CAN-E 3A(~114).qxp  5/21/2019  11:13 AM  Page 67

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2020 SANTA FE

Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Oypla Leisure 4269 User Manual preview
4269
Brand: Oypla Leisure Pages: 4
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
Toyota 1998 Celica Owner'S Manual preview
1998 Celica
Brand: Toyota Pages: 204
Hyundai Sonata 2011 Owner'S Manual preview
Sonata 2011
Brand: Hyundai Pages: 380
Fiat FIORINO Owner'S Handbook Manual preview
FIORINO
Brand: Fiat Pages: 220
Air Lift AirCELL 52205 Installation Manual preview
AirCELL 52205
Brand: Air Lift Pages: 12
VanEssa mobilcamping 00001668 Installation Manual preview
00001668
Brand: VanEssa mobilcamping Pages: 12
Chevrolet 2003 Blazer Owner'S Manual preview
2003 Blazer
Brand: Chevrolet Pages: 426
Erde ST1272A Assembly Instructions preview
ST1272A
Brand: Erde Pages: 3

Brands by name

Popular brands

Load more brands