manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 142 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 142

3-50

Convenient features of your vehicle

Tilting the Sunroof 

When the sunshade is closed

If you push the sunroof control lever
upward towards the roof of the vehicle,
the sunshade will slide open then the
sunroof glass will tilt open.
To stop the sunroof movement at any
point, push the sunroof control lever
either forward or backward momentarily.

When the sunshade is opened

If you push the sunroof control lever
upward, the sunroof glass will tilt open.
To stop the sunroof movement at any
point, push the sunroof control lever
either forward or backward momentari-
ly.

Closing the Sunroof

To close sunroof glass 

Push the sunroof control lever for-
ward to the first detent position.

To close sunroof glass with
sunshade 

Push the sunroof control lever for-
ward to the second detent position.
The sunroof glass will close, then the
sunshade will close automatically.
To stop the sunroof movement at any
point, push the sunroof control lever
either forward or backward momen-
tarily.

Automatic reverse (if equipped)

If the sunroof senses any to an
obstacle while it is closing automati-
cally, it will reverse direction then
stop to allow the object to be cleared.

ODH043039

OTM048025

OTM048026

■

Sunroof glass

■

Sunroof glass with sunshade

Small objects that can get
caught between the sunroof
glass and the front glass chan-
nel may not be detected by the
automatic reverse system. In
this case, the sunroof glass will
not detect the object and will
not reverse direction.

WARNING  

TMa CAN-E 3A(~114).qxp  5/21/2019  11:12 AM  Page 50

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments