manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 331 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 331

5-51

Dri
ving y

our v

ehicle

Drive Mode

The drive mode may be selected
according to the driver's preference
or road condition.

Information 

If there is a problem with the instru-
ment cluster, the drive mode will be in
NORMAL mode and may not change
to other mode. 

The mode changes, as below, when-
ever the DRIVE MODE is pressed.

NORMAL mode

In NORMAL mode the engine and
transmission control logic work
together to provide regular daily driv-
ing performance with some fuel effi-
ciency.
• When NORMAL mode is selected,

it is not displayed on the instrument
cluster.

SPORT mode

SPORT mode manages
the driving dynamics by
automatically adjusting the
steering effort, and the
engine and transmission
control logic for enhanced
driving performance.

• When SPORT mode is selected by

pressing the DRIVE MODE button,
the SPORT indicator will illuminate.

• Whenever the engine is restarted,

the Drive Mode will revert back to
NORMAL mode. If SPORT mode is
desired, re-select SPORT mode
from the DRIVE MODE button.

• When SPORT mode is activated:

- The engine rpm will tend to

remain a little higher for a brief
time even after releasing the
accelerator. This is normal when
the SPORT mode is activated.

- Upshifts are delayed when accel-

erating.

Information 

In SPORT mode, the fuel efficiency
may decrease.

i

i

D

DR

RIIV

VE

E  M

MO

OD

DE

E  IIN

NT

TE

EG

GR

RA

AT

TE

ED

D  C

CO

ON

NT

TR

RO

OL

L  S

SY

YS

ST

TE

EM

M  ((IIF

F  E

EQ

QU

UIIP

PP

PE

ED

D))

5

OTM058026

■ 

Type A

OTM058027

■ 

Type B

SPORT

NORMAL                  SMART

TMa CAN-E 5.qxp  5/21/2019  10:53 AM  Page 51

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments