manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 318 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 318

5-38

Driving your vehicle

Downhill Brake Control disabled.
Control vehicle speed

When the DBC system is not work-
ing properly this warning message
will appear on the LCD display and
you will hear a warning sound. If this
occurs, control the vehicle speed by
depressing the brake pedal.

Information

• Noise or vibration may occur from

the brakes when the DBC is acti-
vated.

• The rear stop light comes on when

DBC is activated. 

• The DBC may not deactivate on

steep inclines even though the
brake or accelerator pedal is
depressed.

• The DBC system may not always

maintain the vehicle speed at a
certain speed.

• The DBC does not operate when:

- The shift lever is in P (Park).
- The ESC is activated.

NOTICE

i

Always turn off the DBC on nor-
mal roads. The DBC might acti-
vate inadvertently from the stand-
by mode when driving through
speed bumps or making sharp
curves.

WARNING  

OTMA048167

TMa CAN-E 5.qxp  5/21/2019  10:53 AM  Page 38

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments