manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 350 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 350

5-70

Driving your vehicle

- BCW turns on and is ready to be

activated when 'Warning Only' is
selected. Then, if a vehicle
approaches the driver's blind
spot area a warning sounds but
braking is not applied.

- The system is deactivated and

the indicator on the BCW/BCA
button is turned off when 'Off' is
selected.

• If you press the BCW/BCA switch

while 'Active Assist' or 'Warning
Only' is selected the indicator on
the switch will turn off and the sys-
tem will deactivate.

• If you press the BCW/BCA switch

while the system is canceled the
indicator on the button illuminates
and the system activates. In this
case, the system returns to the
state before the engine was turned
off.
When the system is initially turned
on and when the engine is turned
off then on again while the system
is in activation, the warning light
will illuminate for 3 seconds on the
outer side view mirror.

• If the engine is turned off then on

again, the system maintains the
previous state.

• The driver can select the initial

warning activation time in the User
Settings in the LCD display by
selecting 'User Settings 

→

Driver

Assistance 

→

Warning Timing'.

OTM058031

OTMA058089

TMa CAN-E 5.qxp  5/21/2019  10:54 AM  Page 70

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments