3-120
Convenient features of your vehicle
Turn signals and lane change
signals
To signal a turn, push down on the
lever for a left turn or up for a right
turn in position (A).
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
OOS047410N
•
Do not attempt to disassem-
ble the front view camera
without the assistance of an
authorized HYUNDAI dealer
technician.
If camera is
removed for any reason, the
system may need to be re-cal-
ibrated.
Have the system
inspected by an authorized
HYUNDAI dealer.
•
If the windshield of your vehi-
cle is replaced, most likely the
front view camera will need to
be re-calibrated.
If this
occurs, have your vehicle
inspected and have the sys-
tem re-calibrated by an
authorized HYUNDAI dealer.
•
Be careful that water doesn’t
get into the High Beam Assist
(HBA) unit and do not remove
or damage related parts of the
High Beam Assist (HBA) sys-
tem.
•
Do not place objects on the
crash pad that reflect light
such as mirrors, white paper,
etc. The system may malfunc-
tion if sunlight is reflected.
•
At times, the High Beam
Assist (HBA) may not work
properly. The system is for
your convenience only. It is
the responsibility of the driver
for safe driving practices and
always check the road condi-
tions for your safety.
•
When the system does not
operate normally, change the
headlamp position manually
between the high beam and
low beam.
WARNING
TMa CAN-E 3B(115~).qxp 5/21/2019 11:26 AM Page 120
