manualshive.com logo in svg

Hyundai 2020 SANTA FE, Manual, Page: 250 / 555

Share
Download
Hyundai 2020 SANTA FE Manual Download Page 250

3-158

Convenient features of your vehicle

System Operation

Cooling / Ventilation

1. Select the Face Level 

mode.

2. Set the air intake control to fresh

mode.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Select the Floor Level 

mode.

2. Set the air intake control to fresh

mode.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If desired, turn the air conditioning

ON with the temperature control
knob set to heat in order to dehu-
midify the air before it enters into
the cabin.

If the windshield fogs up, select the
Floor & Defrost 

mode or press

the Front Defrost 

mode.

Operation Tips

• To keep dust or unpleasant fumes

from entering the car through the
ventilation system, temporarily set
the air intake control to the recir-
culation mode. Return the control
to the to fresh mode when the
unpleasant air outside has dimin-
ished. This will help keep the driv-
er alert and comfortable.

• To help prevent the inside of the

windshield from fogging, set the air
intake control to fresh mode and
the fan speed to the desired posi-
tion, turn on the air conditioning
system, and adjust the tempera-
ture control to the desired temper-
ature.

Air conditioning  

Your HYUNDAI vehicle air condition-
ing system is filled with R-1234yf
refrigerant.
1. Start the engine.
2. Press the air conditioning button.
3. Select the Face Level 

mode.

4. Set the air intake control to

Recirculation mode temporarily to
allow the cabin to cool quickly.
When the desired temperature in
the cabin is reached, change the
air intake control back to Fresh
mode.

5. Adjust the fan speed control and

temperature control to maintain
maximum comfort.

When maximum cooling is desired,
set the temperature control to the
MAX A/C position, then set the fan
speed control to the highest setting.

TMa CAN-E 3B(115~).qxp  5/21/2019  11:29 AM  Page 158

Summary of Contents for 2020 SANTA FE












































































































































































































































































































































































































































































































































































Reviews:

No comments