Operate the Plasma System
3
80
810470
Operator Manual
Powermax65/85/105 SYNC
XT –
This field shows the cumulative arc transfer time that the Hypertherm cartridge has had in its
life, in hours (HH), minutes (MM), and seconds (SS):
HH:MM:SS
.
You can see this same data for the life of the plasma power supply. Refer to
Show cartridge data on the status screen
You can show the cartridge data for pilot arc starts (
STA
) and arc transfer time (
XT
) on the status
screen. When you set the
STA/XT
field to on, these values stay on the status screen until you set
the
STA/XT
field to off.
1.
Push and hold
for 2 seconds to go to the main menu screen.
2.
Turn the adjustment knob to go to
. Push
to select it.
3.
Turn the adjustment knob to go to
, and push
to select it. The LCD Display screen
(
LCD DISPLAY
) shows.
4.
Turn the adjustment knob to go to the
STA/XT
field, and push
to select it.
5.
Turn the adjustment knob to set the
STA/XT
field
to on:
.
6.
Push
to apply the setting.
Summary of Contents for SYNC Powermax 105
