Troubleshoot Common Problems
6
156
810470
Operator Manual
Powermax65/85/105 SYNC
Power Supply Data screen
Go to the Power Supply Data screen (
POWER SUPPLY DATA
) to see information about plasma
power supply performance and use.
1.
Select
on the main menu screen.
2.
Select
to go to the
POWER SUPPLY DATA
screen.
I –
This field shows the set current followed by the live output current (in amperage).
P –
This field shows the inlet set pressure followed by the actual output gas pressure (in psi).
F –
This field shows the active fault code (if any).
VL –
This field shows the input voltage.
VB –
This field shows the bus voltage (VBUS).
VO –
This field shows the arc voltage.
IP –
This field shows the boost PFC IGBT current in amperage. This field shows on the screen for
CSA and for Powermax105 SYNC 230 V – 400 V CE models only.
TP –
This field shows the boost PFC IGBT temperature in Celsius. This field shows on the screen
for CSA and for Powermax105 SYNC 230 V – 400 V CE models only.
TI –
This field shows the inverter IGBT temperature in Celsius.
STA –
This field shows the total number of torch starts the plasma power supply has done in its life.
Summary of Contents for SYNC Powermax 105
