Freedom 38 PPA
Service Manual
809010
171
6 – Air Compression Components
Replace the air pressure gauge
Remove the air pressure gauge
1.
Turn OFF the system. Make sure the power switch on the front panel is in the OFF (
O
) position.
2.
Drain the air tank to release pressure. See page 61.
3.
Remove the top cover from the system. See
4.
From behind the front panel, disconnect the air hose from the 90° fitting at the back of the air pressure gauge. Cut
any cable ties if necessary.
Figure 93
5.
Loosen the 2 screws in the bracket that secure the air pressure gauge to the front panel. The screws do not need to
be removed from the bracket. When loose the bracket can be removed with a twist.
6.
Remove the air pressure gauge from the front panel.
7.
Disconnect the 90° fitting from the back of the air pressure gauge.
Kit number
Description
Summary of Contents for Freedom 38 PPA
