HYBREX G1E, Installation & Programming Manual

Page: 156 / 219

140
Issue 3.3.2 / April, 2011
Program 41-stn-IP : Station Specifications
41-stn-IP STSPE
1 1 0 1 0 0 CN
st = Extension NO.(2-4 digits). IP = 01-07
System Default
Item Display
Pointer Data Programming Data Description Default
---------- ---------- ---------------------------------------------------------------- -----------
01 1-8 Station Group 1=1
02 1-8 Key Group For Key phone 1=1
03 1-8 Shift Key Group For Key phone 0=None
04 1-8 Dial 9 trunk group 1=1
05 0-9 Toll plan - Day 0=0
06 0-9 Toll plan - Night 0=0
07 cn c = Card number, n = Port number
General:
This program permits each station to be assigned to a different Class of Service.
Description:
01. Station group:
This parameter will work with the following features:
- Call Pickup Group.
- Single Digit Intercom Group
- Paging Group
02. Flexible key pattern group assignments (key phone):
This parameter assigns stations to one of 8 flexible key pattern groups.
0 = Disable 1-8 = Soft Key Plan 1 to 8
See Mode 07: Flexible key group assignment to write soft key plans.
03. Shift Key Group for Key phone:
Each station can have access to a second soft key group accessed by the
[SHIFT] key (refer to mode 07). The
shift key must be programmed in the first group assigned to the station. When the shift key is used to access the
second group then it will light red and override any function assigned to it in the second group.
0 = Disable 1-8 = Soft Key Plan 1 to 8
See Mode 07: Flexible key group assignment to write soft key plans.