G1E Programming Manual
179
Program 93 : MINI CALL ACCOUNTING AOC ADDITIONAL NUMBER CHARGING
93-01 Table 01
------ 00 00
01 = Table (01~20)
General:
This program assigns additional charging for numbers dialled under Mini Call Accounting that is not provided
By the Central Office.
Description:
Telstra’s ISDN service has a feature known as Advice Of Charge which provides charging information to ISDN
lines as data which can be displayed and used by the Telephone system for Mini Call Accounting or SMDR
Output. Not all calls are provided with charging information in particular mobiles and this mode allows an
estimated mobile charge to be added to the Mini Call Accounting charging for numbers that are specified here.
Up to 20 numbers of 5 digits each can be programmed. If the whole 5 digits are not specified the Don’t Care
symbol must be entered to the end of the line as usual.
Mode 93 = 123456 AA BB
Hotel+4 = CC DD
The formula of Call Charge is:
If BB is not set to 0
Call Charge = Round(TT/BB) x AA x CC x DD
If BB is set to 0
Call Charge = AA x CC x DD
Where:
AA= Cost per Unit
BB= Seconds per Unit
CC= Server Rate
DD= Decimal point is 2 digits (0=0.01) or 5 digits (5=0.00001)
TT = Talking Time (by second)
Example C:
(Australia local Call with fixed charge rate)
- The setting for Hotel 4 and Mode 93 are as follows:
Mode 93 = 8ddddd 22
00
(AA = 22,
BB = 00
)
[HOTEL][4] = 04 00 (CC = 04, DD = 00)
- One call is 1’18”
The Call Charge will be:
Call Charge = AA x CC x DD = 22 x 04 x 0.01 = 0.88
Example C:
(Australia Internet Call)
- The setting for Hotel 4 and Mode 93 are as follows:
Mode 93 = 0918dd 25 60 (AA = 25, BB = 60)
[HOTEL][4] = 04 00 (CC = 04, DD = 00)
- One call is 3’50” (TT= 230 seconds)
The Call Charge will be:
Call Charge = Round(TT/BB) x AA x CC x DD = Round(230/60) x 25 x 4 x 0.01 = 4.00
Example E:
(Australia Mobile Call)
- The setting for Hotel 4 and Mode 93 are as follows:
Summary of Contents for G1E
