HYBREX G1E, Installation & Programming Manual

Page: 97 / 219

G1E Programming Manual
81
Enhanced Protocol
Internal Call Call Forward - All Calls (Ext) C11 + STB + STA
Call Forward - Busy (Ext) C12 + STB + STA
Call Forward - No Answer (Ext) C13 + STB + STA
Direct Call From Extension C14 + STA + STA
Record Call From Extension C15 + STA + STA
Incoming CO Line and ISDN Indial
Call Forward - All Calls (CO) C21 + STB + TRK
Call Forward - Busy (CO) C22 + STB + TRK
Call Forward - No Answer (CO) C23 + STB + TRK
Direct Call from Trunk C24 + TRK + TRK
Transfer Back to Voice Mail C25 + STB + TRK
Definition:
1. CNM - 2 Digits N: Forward Type 1-9 ( 1 Digit )
M: Leading Digit Type 1-9 ( 1 Digit )
2. STA: Calling Station Number ( 2 - 4 Digits ) 3. STB: Called Station Number( 2 - 4 Digits )
4. TRK: Incoming Trunk Number ( 2 Digits )
The station number will always be 4 digits. The number will be padded out with leading 0’s
Example: C21 + STB + TRK -> Trunk number = 02, STB = 234 - DTMF --> 2 1 0 0 0 2 0 2 3 4
Answer Digit When a called station answers the System will play [DTMF A] .
Busy Digit. When a called station is busy the system will play [DTMF B] .
Disconnect Digit. The system will play [DTMF C] when an inside station disconnects or when a V/M is
connected to a TK which receives polarity reversal or Loop Disconnect.
These 3 functions will considerably speed up the operation of the V/M as it will not have to wait to listen
to tones to see what is happening with calls.
Answering Machine Operation :
When activated this function allows the caller to set call forward to the Voice Mail as usual but then
monitor calls to the Voice Mail from his key phone (on hook) and if they wish can lift the handset and
take the call back from the Voice Mail. To enable the user presses
[SPK] [7][7][3][1] and to disable
presses [SPK] [7][7][3][0] .
Record Function:
This function is dependant on the Recording Unit being capable of inserting the
recording tone to alert the caller they are being recorded. To record it is necessary for the Key
phone to have a
[RECORD] key which is FCN 34 . During a call the STN presses the
[RECORD] button and the Voice Mail will answer if a port is available and the system will send
the Protocol 15 + STN NO + STN No.
Voice Mail System Leading Digit Format
(TCI version only)
1+ extension number = CFWD All Calls (Replaces 11 and 21eeeexxxx)
2+ extension number = CFWD Busy (Replaces 12 and 22eeeexxxx)
3+ extension number = CFWD No Answer (Replaces 13 and 23eeeexxxx)
4+ extension number = Direct Call to Voice Mail (Station) (Replaces 14eeeexxxx)
5+ extension number = Call Record (Replaces 15eeeexxxx)
6+ extension number = Recall to Voice Mail (Replaces 25eeeexxxx)
7+ CO trunk number = Incoming CO Call (Replaces 2400tt00tt)
.
How to enable answer machine
The key phone sets all call forward to voice mail [86]
Press [FN:27] to enable answer machine feature (The led will switch on)