148
Single Digit Dialing
Description
Hybrex digital telephone systems have the capability to provide access to up to five stations by a single
keystroke. Incoming DISA callers may also have access to this function. For more information on DISA
Single Digit Dialing, please see page 71 of this document.
There are up to eight groups programmable on each Superkey system. With the group capability, single
digit dialing can be set up for intra-department single digit access. Through the use of groups, any work
group of up to five stations can be set up for single digit access.
Conditions
Only the digits [1]-[5] are allowed for single digit access.
Eight single digit groups are available per system.
If Single Digit Dialing is enabled on the system, eight groups of five stations may be accessed by a single
digit dialing but only by Stations within the same group. Should a station user wish to dial a station that is
not included in his Single Digit Dialing Assignment, but beginning with one of the single digits used in his
group, the station user must dial [6] + the actual station number of the desired station. In other words, if
the digit ‘1’ was used as a single digit to call station 111, a station in the same group who wanted to dial
station 112 or 113, etc. must dial ‘6’ to defeat the single digit ‘1’, otherwise they would get station 111 as
soon as they dialed the first ‘1’.
For further information on system Numbering plans, see Numbering Plan, page 123 of this document.
Programming
Single Digit Dialing,
Mode 05-04-07 controls system activation of single digit dialing. Valid settings are: ‘0’ to disable the
single digit feature and ‘1’ to enable it.
Mode 10-[GP]-[STN] is used to assign destination stations for each of the five available single digit
positions in a group. Each location is assigned a station number, so that it can be reached by dialing the
corresponding single digit. For example:
If the system is programmed:
10-01-01 = Station 121
10-01-02 = Station 122
10-01-03 = Station 117
A station that is assigned to group 01 will be able to call station 121 by dialing [1]. They will be able to
dial station 122 by dialing [2]. They can call station 117 by dialing [3].
Mode 41-STN-01 determines to which Intercom Single Digit Assignment Group (Mode 10, above) an
individual station belongs. The combination of this programming option and the Single Digit Assignment
Groups allow the G1-824i digital Telephone System to provide up to eight different single digit dialing
patterns. See also, Group Assignment, page 95 of this document.
Operation
1.
Lift the handset (or press the [SPK] key).
2.
Dial a single access digit ([1]-[5]).
3.
The station programmed in the single digit assignment is called. Normal intercom calling
rules apply. A busy station will return busy tone, a station in DND will return DND busy tone,
etc.
Summary of Contents for G1 8-24
