HYBREX G1 8-24, Manual

Page: 10 / 200

10
Auto Answer
Description
Auto Answer allows a speaker phone equipped station to answer all intercom calls automatically. After
Auto Answer is activated on a station, all intercom calls will be placed on the speaker phone as soon as
the calling party dials the Auto Answer extension. The speaker phone equipped station can carry on a
conversation without touching the telephone. When the originating caller hangs up, the Auto Answer set
will revert to an idle state.
Auto Answer applies only to intercom calls. Outside callers must always
be answered by the station.
Conditions
Auto Answer can only work on Hybrex digital telephone sets.
Auto Answer capability is active whether the system is programmed for Voice Signaling or Ring Signaling.
For security purposes, CO calls will ring and must be answered manually.
Programming
Mode 46-Station-03 controls individual stations' utilization of Auto Answer. There are 3 possible settings.
Mode 46-STN-03 Auto Answer Flag 0= Auto Answer /Manual Toggle
1=Auto Answer Enabled / MIC Light Lit 2=Auto Answer Enabled / MIC Light Off
Operation
If set for manual operation, press the [MIC/AT] key. When the key is lit, auto answer is enabled. To
enable and disable, just press the key. The led will light showing auto answer active or be out indicating
auto answer is disabled. Even if auto answer is disabled, DK2 and DK3 models still allow you to place
outside calls and internal calls in the hands free mode.
Note: Models DK2-21 Digital display with speakerphone, DK3-21- Digital Speakerphone have auto
answer capability and hands free speakerphones on outside calls.