manualshive.com logo in svg

HYBREX G1 8-24, Manual

The HYBREX G1 8-24 is an advanced telecommunication system designed to streamline your office communication. With its user-friendly interface, this product offers seamless connectivity and enhanced features. You can easily access the comprehensive user manual, available for free download from our website manualshive.com, ensuring you make the most of this powerful communication solution.

Share
Download
background image

 

 
 

 

42

CO Line Hunting 

Description 

CO Line Hunting provides the ability to route calls to a main answering position and provide an overflow 
capability so that backup answering stations can be automatically added as necessary.  In a busy 
condition, an incoming CO line programmed for hunting will ring the first available station.  If that station 
does not answer, the system will add stations to the ringing sequence, one at a time until the call is either 
answered, abandoned or until all stations (up to 16) in the ringing assignment are added to the ringing 
sequence. 
 
See also, Flexible Ringing Assignment, page 93 in this document. 

Conditions 

The CO line must be programmed for hunting to be operative. 
Stations will be added to the ringing sequence in the order that they are programmed on the incoming 
ringing assignment Modes (Mode 01-[TK]-[station] and Mode 02-[TK]-[station]).  
 

Interactions and Related programming 

 There is a relationship between Hunt Time Assignment Mode 05-08-01 and the Busy Remind/Camp On 
Timer 05-01-05. Note the behavior of the HUNT feature in a busy condition. The system will seek to ring 
the first station programmed in Mode 01. If that station is busy, the hunt timer will begin and when it 
expires, the next station in Mode 01 will ring. If the second station is busy, the will immediately advance to 
the next station.  
An example would illustrate the relationship between the two timers. 
Station 11 and 12 are programmed to ring in Mode 01. 
The HUNT Timer 05-08-01 is set for 15 seconds. 
The Busy Remind/Camp On Timers 05-01-05 is set for 4 seconds. 
 
When an incoming call arrives into the system and station 11 is busy, the HUNT timer is activated and the 
system will attempt to ring station 11 for a period of 15 seconds. During this time, a camp on indication 
both visual and audible will appear at station 11. This gives them the opportunity of placing an existing 
call on hold and answering the new call. A repeated camp on indication will appear every 4 seconds. After 
15 seconds the call will attempt to ring station 12. 
 

Note:

 If the Busy Remind/Camp on parameter is set to 0, station will receive NO indication other than a 

blinking CO line that a new call is arriving. 

Programming 

Day Ringing Assignment, Mode 01-[TK]-[STN] must be programmed for each Trunk in the system.  Up to 
sixteen stations may be programmed for each line.  Lines programmed to hunt will search this Mode in 
the order that stations are programmed.  The system will ring the first available station in this group.  If 
that station does not answer the call within the time period specified on Mode 05-08-01, the system will 
add the next available station (in the order programmed on Mode 01-[TK]-[station]) to the ringing 
sequence.  This action will repeat until all available stations are in the ringing sequence, the call is 
answered or the call is abandoned.  This Mode controls ringing assignments during day service only.  
 
Night Ringing Assignment, Mode 02-[TK]-[STN] must be programmed for each Trunk in the system if 
night service is to be used within the system.  Up to sixteen stations may be programmed for each line.  
Lines programmed to hunt will search this Mode in the order that stations are programmed.  The system 
will ring the first available station in this group.  If that station does not answer the call within the time 
period specified on Mode 05-08-01, the system will add the next available station (in the order 
programmed on Mode 02-[TK]-[STN]) to the ringing sequence.  This action will repeat until all available 
stations are in the ringing sequence, the call is answered or the call is abandoned.  This Mode controls 
ringing assignments during night service only.  
 
Hunt Time Assignment, Mode 05-08-01 sets the interval for adding stations to the ringing sequence in a 
no answer condition.  Every time a station begins ringing, this timer will begin.  If it expires without the call 
having been answered, the next available station in the group defined on Mode 01-[TK]-[STN] or Mode 

Summary of Contents for G1 8-24









































































































































































































Reviews:

No comments

Related manuals for G1 8-24

Panasonic KXTG5776S Guía Rápida preview
KXTG5776S
Brand: Panasonic Pages: 10
Panasonic KX-NS1000 Programming Manual preview
KX-NS1000
Brand: Panasonic Pages: 1182
Yeastar Technology 3CX How To Connect preview
3CX
Brand: Yeastar Technology Pages: 12
Unify OpenScape CP600 Installation And Quick Reference Manual preview
OpenScape CP600
Brand: Unify Pages: 32
Unify OpenScape CP700 Installation And Quick Reference Manual preview
OpenScape CP700
Brand: Unify Pages: 24
Unify OpenScape CP200 Quick Reference Manual preview
OpenScape CP200
Brand: Unify Pages: 2
Unify OpenScape CP600 Quick Reference Card preview
OpenScape CP600
Brand: Unify Pages: 2
Unify OpenScape Desk Phone IP 35G User Manual preview
OpenScape Desk Phone IP 35G
Brand: Unify Pages: 130
Unify OpenScape 4000 Quick Reference Card preview
OpenScape 4000
Brand: Unify Pages: 2
Unifat Technology BTS90 Get Started preview
BTS90
Brand: Unifat Technology Pages: 6
Audiovox TDM-2500 Owner'S Operating Manual preview
TDM-2500
Brand: Audiovox Pages: 40
Ultimate HTX-1000 Owner'S Manual preview
HTX-1000
Brand: Ultimate Pages: 12
Nilfisk-Advance Hybrid YETI HP Directions For Use Manual preview
Hybrid YETI HP
Brand: Nilfisk-Advance Pages: 84
Grundfos UPSe Instructions Manual preview
UPSe
Brand: Grundfos Pages: 21
Prodipe 3760010255346 User Manual preview
3760010255346
Brand: Prodipe Pages: 24
BT DIVERSE 6410 User Manual preview
DIVERSE 6410
Brand: BT Pages: 82
Kogan KAHFKBTCARA User Manual preview
KAHFKBTCARA
Brand: Kogan Pages: 8
W Audio MIC65 User Manual preview
MIC65
Brand: W Audio Pages: 8

Brands by name

Popular brands

Load more brands