HYBREX G1 8-24, Manual

Page: 17 / 200

17
To cancel a Wake Up call from a Digital (non console)station:
1.
Press [REMIND].
2. Enter 00 00 00
3. Press [SAVE].
To program a Wake-Up call from a single line station:
1.
Lift Handset.
2. Dial [7],[0],[0].
3. Dial the Time that you wish the wake up call to notify you (24 hour Format 00:00-23:59). Must be
four digits.
4. Enter [9],[9], to indicate a Wake-Up call.
5. Hang up. The wake-up call is set.
To cancel a Wake-Up call before it rings from a single line station:
1.
Lift Handset.
2. Dial [7],[0],[0].
3. Dial [0],[0],[0],[0],[0],[0].
4. Hang up. The wake-up call is canceled
Automatic Wake Up calls will automatically cancel when the call is answered.
At the Programmed Wake Up Call time, the station will ring. Upon answer, the station will be connected
to either the Voice Service Unit channel programmed or to the system background music source.
If a Wake Up call is not answered, the system will ring the telephone for a period of one minute. If the
call is not answered after one minute of ringing, the system will re-ring the station in three minutes. This
will continue until the call is answered. If an operator station is programmed with a Wake Up/Remind key,
an unanswered Wake Up at any station will cause the Message Key to flash.
The operator can lift the handset and press [MSG] to immediately recall the station