HYBREX G1 8-24, Manual

Page: 13 / 200

13
Automatic Last Number Redial
Description
Automatic Last Number Redial permits a station user to periodically redial the last number dialed. It
utilizes the Last Number that was dialed from the telephone, like Last Number Redial, but it will
repeatedly attempt to dial the number, like Saved Number Redial. Once invoked, it will automatically call
the Last Number Dialed a pre-determined number of times. See also, Saved Number Redial, page 144 of
this document.
Conditions
Automatic Last Number Redial is not available to Single Line Telephone sets.
A station must have a [SPD] dial key and a [Redial] key in order to access this function.
Programming
Mode 05-02-03, Auto Redial Ring Time determines the amount of time the telephone will remain off hook,
waiting for an answer. Please note that if the called telephone number answers during this time period,
the call will still be abandoned if no action is taken by the station user. The valid parameters for this
options are listed below:
Note:
The timer starts upon line seizure, before digits are out pulsed. If Pulse signaling is used, 05-02-
03 must contain a value that allows for the slower pulse dialing. For example, if pulse dialing
requires 7 seconds and Wait for Answer is set for 10 seconds, less than 3 seconds will remain for
the call to ring and be answered. In all likelihood the call will never be completed.
Auto Redial Wait for Answer Timer Mode 05-02-03
1=10 seconds
2=20 seconds 3=30 seconds 4=40 seconds 5=50 seconds
6=60 seconds 7=70 seconds 8=80 seconds 9=90 seconds
Mode 05-05-07, Auto Redial Attempts controls the amount of times that Saved Number Redial will Auto
dial a Saved Number before abandoning any further attempts. Valid settings are listed below:
Auto Redial Attempts Mode 05-05-07 0=No Attempts 1=3 Attempts
2=6 Attempts 3=10 Attempts 4=20 Attempts 5=30 Attempts
6=40 Attempts 7=50 Attempts 8=60 Attempts 9=70 Attempts
Mode 05-05-08, Auto Redial On Hook Timer programs the idle interval between call attempts. The valid
options for this parameter are listed below:
Auto Dial On Hook Timer Mode 05-05-08 0=10 seconds 1=20 seconds
2=30 seconds 3=40 seconds 4=50 seconds 5=60 seconds
6=70 seconds 7=80 seconds 8=90 seconds 9=100 seconds
Operation
1. Make an outgoing telephone call.
2. Hang Up.
3. Press [SPD]. Press [Redial]
4. The telephone system will automatically seize an outgoing Trunk and redial the number that was
dialed in step 1 above.
The Auto Redial portion of the function is canceled if any station user action is taken. Pressing the
[MIC/AT] button or lifting the handset while a call is in progress will cancel the off hook timer and the call
will remain in place. Pressing the [SPK] button while the call is in progress will abort the Auto Redial
function. Placing another call during the On Hook timer (while the telephone is idle) will not abort the
Auto Redial function. It will resume after you have returned the telephone to idle.