HYBREX G1 8-24, Manual

Page: 65 / 200

65
Mode 05-01-04, Delay DISA Access determines how long the incoming Trunk will ring before it is
answered by DISA. The parameters are listed below:
Delayed DISA Access Mode 05-01-04 0=2 second 1=4 seconds
2=4 seconds 3=6 seconds 4=8 seconds 5=15 seconds
6=30 seconds 7=60 seconds 8=120 seconds 9=254 seconds
DISA Recall No Digits Dialed, Mode 05-07-04 determines the recall path, if any for a DISA call when an
incoming caller does not dial digits. If No Recall is selected on Mode 05-07-04, the call will be
disconnected when the No Digits Dialed Timer (Mode 05-08-07) expires. The valid options are:
05-07- 04 - DISA Operator Recall Capability (No Digits Dialled)
Setting Situation
No dialing after the first
voice announcement
from the VSU. The VSU has
announced that the
called station is busy or
no answer The VSU has already
announced the invalid
number or a dialed number
that has not been received
completely.
0=
* * *
1= T
* *
2=
*
T
*
3= T T
*
4=
* *
T
5= T
*
T
6=
*
T T
7= T T T
Note “*” = Transfer the incoming
call to console
“T” =System will announce
VSU function 06 (if
programmed) to the incoming
call if no digits dialed timer has
expired. System releases call
(hangs up).
“*” =See Mode 46-ST-04
“T” =See Mode 46-ST-04. If
46-ST-04 is no recall to
operator, VSU function 06
will be played to the caller (if
programmed). System will
release call (hang up).
“*” = System will transfer incoming
caller to system operator if 05-08-
07 has expired.
“T”
=System will play VSU function
06 (if programmed) to the caller if
05-08-07 has expired. System will
release the call (hang up).
DISA Transfer Group, Mode 05-08-04 determines the routing for a DISA call that reaches a non-
answering station. With this option, the DISA call can be sent to the console assignment group of either
the CO line or the console assignment of the unanswered station. Valid settings are:
DISA Transfer Group Mode 05-08-04
0=Recall to Console Group of the Unanswered Station
1=Recall to Console Group of the CO line group
DISA Transfer Timer, Mode 05-08-06, in conjunction with the counters as shown on the DISA flow chart,
determines the length of time that the system software will attempt to ring the station user. Valid settings
for this option are as follows:
DISA Transfer Time (No Answer)
(Mode 05-08-06) 0=8 seconds 1=16 seconds
2=24 seconds 3=32 seconds 4=40 seconds 5=48 seconds
6=56 seconds 7=64 seconds 8=72 seconds 9=80 seconds