HYBREX G1 8-24, Manual

Page: 116 / 200

116
Operation
From a G1-824 digital telephone set:
Place an intercom call. The target station is busy or does not answer.
1. Press [MSG] button.
2. Hang Up.
Note: If the station that sets the message is using the hands free mode, the telephone will
automatically hang up as soon as the [MSG] button is pressed.
3. If the called station is a G1-824 digital telephone set, the [MSG] key will flash. If the digital set is
equipped with LCD, the display will show that a message is waiting.
4. If the called station is a single line telephone, the telephone will ring periodically (approximately
every 5 minutes). If the single line user answers during the ringing cycle, he will be routed either
to the VSU or to the call originator (depending on system programming on Mode 05-04-08).
To answer a message waiting from a G1-824 digital telephone set:
1. Press the flashing [MSG] button. (If equipped with LCD, the display will show the originating
party).
2. Lift the handset or press [SPK] to call the station that left the message or press [#] to cancel the
message.
From a single line telephone set:
1. Place an intercom call. The target station is busy.
2. Press [6].
3. Hang Up.
4. If the called station is a G1-824 digital telephone set, the [MSG] key will flash. If the digital set is
equipped with LCD, the display will show that a message is waiting.
Note:
If the called station is a single line telephone, the telephone will ring periodically (approximately
every 5 minutes). If the single line user answers during the ringing cycle, he will be routed either
to the VSU or to the call originator (depending on system programming on Mode 05-04-08).
A single line telephone can also check messages by dialing 76 whenever the user hears message waiting
dial tone. The originator of the message will be rung.
From a Voice Mail port:
To set a message waiting, dial 7071 + the extension number.
To cancel a message waiting, dial 7072 + the extension number.