HYBREX G1 8-24, Manual

Page: 200 / 200

200
Mode 05-04-02, Dial 9 Activation may be disabled on systems where there is no desire to utilize dial 9
functions. When this option is disabled, a station cannot dial 9 to access his dial 9 line Group (from Mode
36). However, a station may directly access any CO line that is in his dial 9 group.
G1-824i a station may directly access by dialing 80+ the line number (from 1 to 8).
Mode 05-08-02, Direct CO Access
can be enabled or disabled to allow or deny direct access to CO
lines. When enabled, stations will be able to directly access any CO line in the system by the methods
listed below:
A station may directly access by dialing 80+ the line number (from 1 to 8).
If this option is disabled, stations will only have access to CO lines that are in their Dial 9 group (Mode
36). This is true whether Dial 9 activation is enabled or not.
Mode 41-Station-04, Dial 9 Group
determines which dial 9 group is applicable to each station. There
are eight groups in Superkey systems. A setting of 1 corresponds to the CO lines programmed in Mode
36-01. A setting of 2 corresponds to the CO lines programmed in Mode 36-02, etc., up to a setting of 8,
which corresponds to Mode 36-08.
This Mode will also assign an alternate Dial 87 Group that corresponds to the entry. Dial 87 groups are
programmed on Mode 38. There are eight groups available on the Superkey system.
Station Lock
will cause a station to be subject to Toll Class 9. As noted in the section of this Appendix, a
Toll Class of 9 is completely restricted with the exception of any items found in Mode 59.
Forced Account Codes will take a station from the programmed Toll Restriction Class to a Toll Class 0
for the duration of a single call. For more information please see page 94 of the Features and Services
Description