6.9
Installing the fork legs
H03252-10
FORK, TRIPLE CLAMP 6
Main work
-
Position the fork legs.
✓ Air release screw
O
of the right fork leg is positioned to
the front.
✓ Valve
f)
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
- Tighten screws
8.
Guideline
Screw, top triple
clamp
- Tighten screws@).
Guideline
M8
Screw, bottom triple
M8
clamp
17 Nm (12.5 lbf ft)
12 Nm (8.9 lbf ft)
-
Position the brake line and clamp. Mount and tighten
screws
e.
Finishing work
-
Install the front wheel. (
8
p. 121)
-
Remove screws
O
and take off the clamp.
-
Remove screws @ and take off the left fork protector.
-
Remove screws
(s)
and take off the right fork protector.
...
...
19
