HUM sat 805 Manual Download Page 67 | Manualshive

Page: 67 / 101

HUM sat 805 Manual Download Page 67

sat 805 Pulse Oximeter

Control

67

7.8

Alarm lists

(Alarm lists)

The sat 805 continuously stores monitoring data. SpO

2

, pulse and IQ values are continuously logged on a

second-by-second basis. In addition, data related to monitoring, such as alarms and device settings, are also
stored. In the basic extension stage, the device stores 160 hours of continuous monitoring with a maximum
of 4000 alarm list entries. Though only the last 500 are visible and displayed on the screen.

NOTICE!

Even in the case of an entire voltage loss the alarm lists remain unchanged.

Also in the state of ALARM VOLUME = 0 (=OFF) all alarms are logged.

On the device you have the option of analyzing the stored data in the form of lists and alarm event
graphics:

–

a list of all alarm events

–

the vital alarm list

–

trend displays

The stored data can be exported via various interfaces for more detailed evaluation.

«
...
65
66
67
68
69
...
»

Summary of Contents for sat 805






































































































Reviews:

No comments