HUM sat 805 Manual Download Page 22

Page: 22 / 101

sat 805 Pulse Oximeter

Assembly

What is signal IQ™?

Signal-

IQ™ is a measurement for Signal

-Identification and Signal-Quality. Masimo developed this

indicator to give the user information when a measurement is questionable. Signal-

IQ™ is a visual

reliability indicator for the oxygen saturation and pulse frequency measurements.

The more difficult it is to detect an arterial pulse signal the lower the presented IQ-bar (2). The

Signal-IQ-figure is particularly valuable with movement, weak circulation, or environmental

influences.

What is the Perfusion-Index?

The Perfusion-Index is a measurement for pulse strength at the point of sensor measurement. The

Perfusion-Index varies from 0.02% (very weak pulse strength) to 20% (very strong pulse signal). The

Perfusion-Index is calculated from the reflected infrared portion. The Perfusion-Index is a relative

measurement and can vary at each application point and with different patients.

4.4

Pictograms on the Device

Symbol

Meaning

ON-/OFF-Button

DC current power connector

USB connector

Analogue interface

Nurse call interface

ATTENTION! Read instructions for use!

Summary of Contents for sat 805






































































































Search results

Summary of Contents for sat 805

Reviews:

HUM sat 805, Manual, Page: 22 / 101

Search results

Summary of Contents for sat 805

Reviews: