manualshive.com logo in svg

Huawei B222s, User Manual

The Huawei B222s is a cutting-edge wireless router designed to provide fast and reliable internet connectivity. To help you make the most of its features, we offer a comprehensive user manual that can be downloaded for free from our website. Explore all the possibilities of your device with our user manual.

Share
Download
background image

Appendix F Legal Information

B222s User’s Guide

254

本機限在不干擾合法電臺與不受被干擾保障條件下於室內使用。 
減少電磁波影響，請妥適使用。

Notices 

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the 

equipment.
This device is designed for the WLAN 2.4 GHz and/or 5 GHz networks throughout the EC region and Switzerland, with restrictions in 

France.
Ce produit est conçu pour les bandes de fréquences 2,4 GHz et/ou 5 GHz conformément à la législation Européenne. En France 

métropolitaine, suivant les décisions n°03-908 et 03-909 de l’ARCEP, la puissance d’émission ne devra pas dépasser 10 mW (10 dB) dans 

le cadre d’une installation WiFi en extérieur pour les fréquences comprises entre 2454 MHz et 2483,5 MHz. 
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Safety Warnings

• Do NOT use this product near water, for example, in a wet basement or near a swimming pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY 

qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Use ONLY an appropriate power adaptor or cord for your device.

• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).

• Do NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting 

it to a power outlet. 

• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power 

adaptor or cord.

• Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.

• If the power adaptor or cord is damaged, remove it from the device and the power source.

• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.

• Do not use the indoor device (IDU) outside, and make sure all the connections are indoors. There is a remote risk of electric shock 

from lightning. 

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device. 

• Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.

• If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged. 
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical 

Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and 

electronic equipment should be treated separately. 

Summary of Contents for B222s




































































































































































































































































Reviews:

No comments

Related manuals for B222s

Aaeon AIOT-QA User Manual preview
AIOT-QA
Brand: Aaeon Pages: 40
Matrix simado gfx11 System Manual preview
simado gfx11
Brand: Matrix Pages: 88
DIGITAL YACHT LANLINK ZDIGLANLINK Installation And Instruction Manual preview
LANLINK ZDIGLANLINK
Brand: DIGITAL YACHT Pages: 7
Rose Point nemo Installation Manual preview
nemo
Brand: Rose Point Pages: 27
Dell PowerConnect J-SRX240 Hardware Manual preview
PowerConnect J-SRX240
Brand: Dell Pages: 160
Dell PowerConnect J-SRX210 Hardware Manual preview
PowerConnect J-SRX210
Brand: Dell Pages: 182
Dell Dell Edge Gateway 3002 Specifications preview
Dell Edge Gateway 3002
Brand: Dell Pages: 22
Dell PowerConnect J-SRX100S Getting Started Manual preview
PowerConnect J-SRX100S
Brand: Dell Pages: 44
Dell SonicWall SRA 1600 Getting Started Manual preview
SonicWall SRA 1600
Brand: Dell Pages: 57
Bticino L4500C Manual preview
L4500C
Brand: Bticino Pages: 4
L&S SMART GATEWAY Technical Data Manual preview
SMART GATEWAY
Brand: L&S Pages: 28
Televes 769301 Manual preview
769301
Brand: Televes Pages: 46
Avid Technology iNEWS Installation & Operation Manual preview
iNEWS
Brand: Avid Technology Pages: 152
Maverick MW-P54SS User Manual preview
MW-P54SS
Brand: Maverick Pages: 21
ELKOR ETBAC Installation Manual preview
ETBAC
Brand: ELKOR Pages: 2
FP 50.0070.0001.00 Configuration Manual preview
50.0070.0001.00
Brand: FP Pages: 98
ICPDAS GW-7472 Quick Start Manual preview
GW-7472
Brand: ICPDAS Pages: 7
EnGenius EL-EPG5000 Quick Start Manual preview
EL-EPG5000
Brand: EnGenius Pages: 10

Brands by name

Popular brands

Load more brands