manualshive.com logo in svg

Huawei B222s, User Manual

The Huawei B222s is a cutting-edge wireless router designed to provide fast and reliable internet connectivity. To help you make the most of its features, we offer a comprehensive user manual that can be downloaded for free from our website. Explore all the possibilities of your device with our user manual.

Share
Download
background image

Appendix D Wireless LANs

B222s User’s Guide

234

The following figure shows the relative effectiveness of these wireless security methods available on 
your LTE Device.

Note: You must enable the same wireless security settings on the LTE Device and on all 

wireless clients that you want to associate with it. 

IEEE 802.1x

In June 2001, the IEEE 802.1x standard was designed to extend the features of IEEE 802.11 to 
support extended authentication as well as providing additional accounting and control features. It 
is supported by Windows XP and a number of network devices. Some advantages of IEEE 802.1x 
are:

• User based identification that allows for roaming.
• Support for RADIUS (Remote Authentication Dial In User Service, RFC 2138, 2139) for 

centralized user profile and accounting management on a network RADIUS server. 

• Support for EAP (Extensible Authentication Protocol, RFC 2486) that allows additional 

authentication methods to be deployed with no changes to the access point or the wireless 
clients. 

RADIUS

RADIUS is based on a client-server model that supports authentication, authorization and 
accounting. The access point is the client and the server is the RADIUS server. The RADIUS server 
handles the following tasks:

• Authentication 

Determines the identity of the users.

• Authorization

Determines the network services available to authenticated users once they are connected to the 
network.

• Accounting

Keeps track of the client’s network activity. 

Table 86   

Wireless Security Levels

SECURITY 
LEVEL

SECURITY TYPE

Least       
Secure                                                                                  

Most Secure

Unique SSID (Default)

Unique SSID with Hide SSID Enabled

MAC Address Filtering

WEP Encryption

IEEE802.1x EAP with RADIUS Server Authentication

Wi-Fi Protected Access (WPA)

WPA2

Summary of Contents for B222s




































































































































































































































































Reviews:

No comments

Related manuals for B222s

Eaton SmartWire-DT EU5C-SWD-DP Manual preview
SmartWire-DT EU5C-SWD-DP
Brand: Eaton Pages: 88
THOR H-1ASI-IP-B User Manual preview
H-1ASI-IP-B
Brand: THOR Pages: 20
Mellanox Technologies BridgeX BX5020 GT Series User Manual preview
BridgeX BX5020 GT Series
Brand: Mellanox Technologies Pages: 64
ZyXEL Communications ZyXEL ZyWALL 10W Specifications preview
ZyXEL ZyWALL 10W
Brand: ZyXEL Communications Pages: 2
Night Owl WG4 Series Quick Setup Manual preview
WG4 Series
Brand: Night Owl Pages: 8
Aaeon AIOT-IP6801 User Manual preview
AIOT-IP6801
Brand: Aaeon Pages: 29
UfiSpace S9501-28SMT Hardware Installation Manual preview
S9501-28SMT
Brand: UfiSpace Pages: 29
Technica Engineering 1150 Manual preview
1150
Brand: Technica Engineering Pages: 7
Planet VIP-450 Reference Manual preview
VIP-450
Brand: Planet Pages: 8
Planet IMG-110T Quick Installation Manual preview
IMG-110T
Brand: Planet Pages: 16
Planet HAC-1000 Quick Installation Manual preview
HAC-1000
Brand: Planet Pages: 16
Planet WSG-401 User Manual preview
WSG-401
Brand: Planet Pages: 131
Omnio 6011000 Manual preview
6011000
Brand: Omnio Pages: 19
Kaon PG2141 Quick Installation Manual preview
PG2141
Brand: Kaon Pages: 5
PR Elecronics 4801 Installation And Connection Manual preview
4801
Brand: PR Elecronics Pages: 24
Wildix W04FXO Quick Installation Manual preview
W04FXO
Brand: Wildix Pages: 5
Wildix DaySaver Quick Installation Manual preview
DaySaver
Brand: Wildix Pages: 15
Coalesenses iSense User Manual preview
iSense
Brand: Coalesenses Pages: 30

Brands by name

Popular brands

Load more brands