manualshive.com logo in svg

Huawei B222s, User Manual

The Huawei B222s is a cutting-edge wireless router designed to provide fast and reliable internet connectivity. To help you make the most of its features, we offer a comprehensive user manual that can be downloaded for free from our website. Explore all the possibilities of your device with our user manual.

Share
Download
background image

Chapter 15 VoIP

B222s User’s Guide

134

15.6  The Phone Region Screen

Use this screen to maintain settings that depend on which region of the world the LTE Device is in. 
To access this screen, click VoIP > Phone > Region.

Figure 74   

VoIP > Phone > Region

Each field is described in the following table.

15.7  The Call Rule Screen

Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides 
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial 
entries if you want to call SIP numbers that contain letters. Once you have configured a speed dial 

SIP Account

Select a SIP account if you want to receive phone calls for the selected SIP account on 
this phone port.

If you select more than one SIP account for incoming calls, there is no way to distinguish 
between them when you receive phone calls. If you do not select a source for incoming 
calls, you cannot receive any calls on this phone port.

SIP Number

This shows the SIP account number.

Apply

Click Apply to save your changes.

Back

Click Back to return to the previous screen without saving.

Table 53   

Phone Device: Edit (continued)

LABEL

DESCRIPTION

Table 54   

VoIP > Phone > Region

LABEL

DESCRIPTION

Region Settings

Select the place in which the LTE Device is located.

Call Service Mode

Select the mode for supplementary phone services (call hold, call waiting, call transfer 
and three-way conference calls) that your VoIP service provider supports.

•

Europe Type - use supplementary phone services in European mode.

•

USA Type - use supplementary phone services American mode.

You might have to subscribe to these services to use them. Contact your VoIP service 
provider.

Apply

Click this to save your changes and to apply them to the LTE Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Summary of Contents for B222s




































































































































































































































































Reviews:

No comments

Related manuals for B222s

IFM Electronic ASinterfoce AC1325 Installation Instructions Manual preview
ASinterfoce AC1325
Brand: IFM Electronic Pages: 23
ADTRAN 834-v6 Quick Start Manual preview
834-v6
Brand: ADTRAN Pages: 8
T-Mobile TMO-G4AR User Manual preview
TMO-G4AR
Brand: T-Mobile Pages: 25
Eurogard ServiceRouter V3 Quick Start preview
ServiceRouter V3
Brand: Eurogard Pages: 4
ECKELMANN LAN Gateway Operating Instruction preview
LAN Gateway
Brand: ECKELMANN Pages: 34
ICC ECAT-1000 User Manual preview
ECAT-1000
Brand: ICC Pages: 58
ICC DNET-100 User Manual preview
DNET-100
Brand: ICC Pages: 70
ZKTeco F16 Quick Start Manual preview
F16
Brand: ZKTeco Pages: 20
Zhone 6738 User Manual preview
6738
Brand: Zhone Pages: 151
Baxi Gateway 17 Installation Manual preview
Gateway 17
Brand: Baxi Pages: 10
engelmann Gateway Manual preview
Gateway
Brand: engelmann Pages: 23
engelmann 9080000003 Installation And Operating Instructions Manual preview
9080000003
Brand: engelmann Pages: 24
Juniper SRX 5800 Hardware Manual preview
SRX 5800
Brand: Juniper Pages: 536
Eaton Power Xpert Meter 2000 Quick Start Manual preview
Power Xpert Meter 2000
Brand: Eaton Pages: 12
Technicolor MediaAccess TG789vn Setup And User Manual preview
MediaAccess TG789vn
Brand: Technicolor Pages: 128
NavCom Technology REX-Bluetooth User Manual preview
REX-Bluetooth
Brand: NavCom Technology Pages: 7
Renu Electronics GWY-00 User Manual preview
GWY-00
Brand: Renu Electronics Pages: 105
ZyXEL Communications AMG1202-T10A User Manual preview
AMG1202-T10A
Brand: ZyXEL Communications Pages: 296

Brands by name

Popular brands

Load more brands