HP Workstation xw3100, Service And Technical Reference Manual

Page: 101 / 148

Service and Technical Reference Guide, xw3100 C–3
POST Error Messages
214-DIMM
Configuration Warning Populated DIMM
Configuration is
unbalanced. 2 DIMMS - For maximum performance,
place both DIMMs in the two BLACK
DIMM slots.
4 DIMMS - For maximum performance,
swap one DIMM in a BLUE slot with one
in a BLACK slot.
301-Keyboard Error Keyboard failure. Reconnect keyboard with workstation
turned off.
Check connector for bent or missing
pins.
Ensure that none of the keys are
depressed.
Replace keyboard.
303-Keyboard
Controller Error I/O board keyboard
controller. Reconnect keyboard with workstation
turned off.
Replace the system board.
304-Keyboard or
System Unit Error Keyboard failure. Reconnect the keyboard with workstation
turned off.
Ensure that none of the keys are
depressed.
Replace keyboard.
Replace system board.
401-Parallel Port 1
Address Assignment
Conflict IRQ address conflicts with
another device. Reset the IRQ.
402-Parallel Port 2
Address Assignment
Conflict IRQ address conflicts with
another device. Reset the IRQ.
403-Parallel Port 3
Address Assignment
Conflict IRQ address conflicts with
another device. Reset the IRQ.
404-Parallel Port
Address Conflict
Detected Both external and internal
ports are assigned to
parallel port X. Remove any parallel expansion cards.
Clear CMOS.
Reconfigure card resources and/or run
Computer Setup (F10 Setup).
410-Audio Interrupt
Conflict IRQ address conflicts with
another device. Reset the IRQ.
411-Network Interface
Card Interrupt Conflict IRQ address conflicts with
another device. Reset the IRQ.
417-Network Interface
card Failure Failure to read MAC
address information from
NIC. Unplug AC power cord, wait 5 seconds,
then reboot unit.
POST Error Messages
Screen Message Probable Cause Recommended Action