HP Open View, Installation And Maintenance Manual

Page: 38 / 184

Completing the Appliance Setup
38 Continuous Access Storage Appliance Installation and Maintenance Guide
Configuring remote access
If corruption occurs and you need to configure remote access for the ports, you can:
■
Reset security for all ports. (See “ Resetting security for all ports .”)
■
Manually configure access for individual ports. (See “ Manually configuring port access .”)
Resetting security for all ports
To reset security for all ports listed in Table 3 :
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Click switchui to open the Windows NT desktop. See “ Using switchui ” on page 28 for
instructions.
3. Click Start > Settings > Control Panel.
The Control Panel window opens.
4. Double-click Network.
The Network window opens.
5. Double-click Protocol.
The Protocol window opens.
6. Select TCP/IP and click Properties.
The Properties dialog box opens.
7. Click Advanced.
The Advanced dialog box opens.
8. Click Configure in the Enable security box.
9. Under TCP and UDP, select the Permit All options.
10. Exit all windows and reboot the appliance node when prompted.
11. Press Alt+C to open a command prompt window.
12. To reset port security on the appliance node, enter the following command:
c:\rpic\utilites\SetPortSecurity E10001