manualshive.com logo in svg

HP Open View, Installation And Maintenance Manual

Share
Download
HP Open View Installation And Maintenance Manual Download Page 70

Implementing Path Failover

70

Continuous Access Storage Appliance Installation and Maintenance Guide

Installing HP StorageWorks Secure Path for Windows

This section describes how to install and use HP StorageWorks Secure Path:

■

Secure Path overview

■

Installing the Secure Path Agent

■

Installing Secure Path Manager

■

Configuring Secure Path Manager

■

Using Secure Path Manager

Secure Path overview

The appliance installation CD contains the Secure Path for Windows failover software and 
license agreement, which states that Secure Path is licensed for use with the appliance only.

Secure Path provides node failover when the appliance is connected to any of the following 
arrays:

■

HP StorageWorks Modular SAN Arrays (MSA) 

■

HP StorageWorks EMA/MA (HSG80 controllers)

■

HP StorageWorks Enterprise Virtual Arrays (EVAs) with HSV controllers

The Secure Path software contains the Agent, which is already installed on the appliance 
nodes, and the Manager, which you install on the hosts. 

For more information about Secure Path V4.0B, refer to the HP StorageWorks Secure Path 
V4.0B for Windows Workgroup Edition Read Me First (June 2003, part number 
AA-RR4BD-TE) at the following web site:

http://h18000.www1.hp.com/products/sanworks/secure-path/documentation.html

Click manuals (guides, supplements, addendums, etc.) under self-help resources. Scroll 
through the list of manuals and click secure path v4.0B for Windows workgroup edition 
read me first.

Summary of Contents for Open View

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands