manualshive.com logo in svg

HP Open View, Installation And Maintenance Manual

Share
Download
HP Open View Installation And Maintenance Manual Download Page 126

Reinstalling the Appliance Software

126

Continuous Access Storage Appliance Installation and Maintenance Guide

16. Ensure that the following services are set to Automatic:

■

Identification and Authorization Server

■

RPIC DPF

■

sv3000 Management Server (SMS)

■

Tomcat

■

VA Status Monitor (VSM)

■

WebServer

17. Reboot the appliance node.

18. On the console window, click sanos admin > initialize.

19. When prompted, enter the user name and password for the administrator account. Reenter 

the password when prompted.

20. To verify that the appliance nodes can detect each other, enter:

get node

21. Repeat 

step 20

 on the peer node.

Note:  

Install the appropriate back–end path failover software on the appliance node, if applicable.

What to do next

To complete the reinstallation of the appliance software:

1. Set the date and time. (See “

Setting the current date and local time

” on page 31.)

2. Connect the cables between the appliance node and the storage arrays.

3. Initialize the user database. (See “

Initializing the user database

” on page 48.)

4. Perform a restore, if applicable. 

(Refer to “

Backing Up and Restoring Files

” in the HP OpenView Continuous Access 

Storage Appliance System Administrator’s Guide for more information.)

Summary of Contents for Open View

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands