Reinstalling the Appliance Software
125
Continuous Access Storage Appliance Installation and Maintenance Guide
8. Enter the network information for the appliance node and click OK. (See “
” on page 42 for instructions.)
9. Click OK when the following message is displayed:
The operation completed successfully. Please reboot this
machine for the changes to take effect.
Note:
Do
not
reboot the appliance node at this time.
Caution:
Follow steps 11 through 14 carefully. Failure to do so may cause the appliance
nodes to become inoperable.
10. Press Alt+C to open a command prompt window and enter the following command:
c:\rpic\utilities\pardisk.exe
11. Enter
n
when the following prompt is displayed:
Would you like to overwrite E: F: G: H: I: J: partitions?
Y/[N]
12. Enter
n
when the following prompt is displayed:
Would you like to reinitialize Drive Q for async IP
mirroring? Y/[N]
13. Enter
y
when the following prompt is displayed:
Would you like to remount shared drives and update drive
letter's registry? Y/[N]
The following message is displayed:
WARNING! Make sure all SV3000 services are stopped on both
peer nodes before you continue. Are you sure? Y/[N]
14. If you have followed this procedure correctly, all services on the nodes will have been
stopped. You can first verify that the services have stopped (open another command
prompt window or use service viewer on the console). When you are ready to continue,
enter
y
.
Note:
Wait until the
pardisk
command has finished before continuing with the next step.
15. On the console window, click service viewer.
The Services window opens.
