Implementing Path Failover
72
Continuous Access Storage Appliance Installation and Maintenance Guide
Installing Secure Path Manager
Ensure the host meets the following requirements before installing Secure Path Manager:
■
Internet Explorer
■
IP connectivity to the appliance node
■
JAVA version 1.3.1 only
■
Supported Secure Path Manager version (confirm with CASA support team)
To install Secure Path Manager on a host:
1. Copy the following executable to the host on which you want to install Secure Path
Manager:
SPM_V40_xx.exe
This executable is also located on the appliance nodes in the following directory:
c:\sanlink support software\compaq storage\SecurePath\v4.0xx
2. From the host, use WinZip to extract the contents of the
SPM_V40_xx.exe
file to a
temporary directory, such as
c:\sp
.
3. Open the
c:\sp\SPM_V40_xx
directory and run
AutoMenu.exe
.
4. Click Install Applications.
5. Click Install SecurePath Manager.
6. Click Next.
7. Click Yes for the license agreement.
8. Click Next when prompted for the directory location.
9. At the
Install Notification Utility?
prompt, click No.
10. At the confirmation prompt, click No.
11. Click Next.
12. Click Finish.
13. Click Exit twice.
