Replacing and Configuring Appliance Components
113
Continuous Access Storage Appliance Installation and Maintenance Guide
This command displays the contents of the
sanlink
log, including the search string and
a four–digit number as follows:
verifySharedDiskScsiAddress – Shared Disk found at 4 0 0 0
.
11. Search the log to find a four–digit number that is not equal to
4 0 0 0
, such as:
verifySharedDiskScsiAddress – Shared Disk found at 6 0 0 0
.
12. Record the number that you find.
13. To open the
sanlink.cfg
file in Notepad, enter:
cd c:\Rpic
notepad sanlink.cfg
14. Locate the string
SharedDiskScsiAddress=X X X X
, where
X X X X
is the SCSI
address of the shared storage array.
15. Change the value of
X X X X
to the number you recorded in step 12.
16. Save and close the
sanlink.cfg
file.
17. Return to the hp OV CASA Console window and click service viewer.
The Services window opens.
18. Select the RPIC DPF service, set it to Automatic, and then click Start.
19. After RPIC DPF has started, repeat step 18 for the SMS service.
20. Close the Services window.
21. Select sanos admin > launch from the console window:
22. Log in to
sanosadmin
and enter:
mod hba –updatehbas
23. When you receive a message that the HBA(s) have been updated, exit
sanosadmin
.
24. Press Alt+C to open a command prompt window and enter:
cd C:\Rpic
notepad sanlink.cfg
The
sanlink.cfg
file opens in Notepad.
25. Locate the string
SharedDiskScsiAddress=X X X X
and change the value
to
4 0 0 0
.
26. Save and close the
sanlink.cfg
file.
27. Connect the storage cables to the appliance node.
28. Reboot the appliance node.
29. After the node reboots, verify that all services have started successfully.
30. Open
sanosadmin
and enter:
mod hba –updatetargets
31. To verify that the nodes can detect each other, enter:
get node
32. Repeat step 31 on the other appliance node.
33. Perform a backup on both appliance nodes.
