Replacing and Configuring Appliance Components
120
Continuous Access Storage Appliance Installation and Maintenance Guide
Reconfiguring the driver
If you update the driver of the Gigabit Ethernet card, you must reconfigure the driver.
Note:
You do not have to reconfigure the driver if the Gigabit Ethernet card is being replaced.
To reconfigure the driver:
1. Power on the appliance node.
2. Ensure that the hp OV CASA Console window is open in administrative mode.
3. Right click the console window and click Network Neighborhood > Properties.
The Properties window open.
4. Click Adapters and click Add.
5. Click Have Disk.
The Insert Disk window opens.
6. Select the following series of folders and click OK:
c:\Sanlink Support Software\Intel Gigabit Adapter Driver\NT 4
The Select OEM Option window opens with Intel (R) PRO/1000 Adapter selected.
7. Click OK.
The Windows NT Setup window displays the files being copied. When copying is
complete, the Network window displays the following two cards:
■
HP NC7781 Gigabit Server Adapter Bus 1
■
Intel(R) PRO/1000 Gigabit Ethernet Adapter
8. Click Close to update the configuration.
The Microsoft TCP/IP Properties window opens.
9. Click Intel (R) PRO/1000 Adapter from the list in the Adapter box.
10. Enter the IP address and subnet mask (provided by the customer) and click Apply.
11. Click OK.
The following prompt is displayed:
Do you want to restart the computer?
12. Click Yes.
