HP OmniBook 2100 Reference Manual Download

Page: 88 / 129

6-2

Using the

Recovery CD

You can use the OmniBook

Recovery CD

to recover an original OmniBook build, or

you can use it to install the HP custom software over a user-installed alternate
operating system.

The

Recovery CD

provides the OmniBook-specific drivers to configure your custom

system. The drivers are located in these places:

•

On the

Recovery CD

ROM, under \Omnibook\Drivers.

•

On the OmniBook hard drive under C:\Omnibook\Drivers.

•

On the OmniBook website at

http://www.hp.com/omnibook

. This website

contains the latest updates of software drivers.

Important

The drivers for the retail version of these operating systems, as well as other
operating systems, are located on the OmniBook website. Detailed instructions are
located in the Readme file in OmniBook/Drivers.

The OmniBook

Recovery CD

includes the following:

Summary of Contents for OmniBook 2100


































































































































Search results

Summary of Contents for OmniBook 2100

Reviews:

Related manuals for OmniBook 2100

Brands by name

Popular brands

HP OmniBook 2100, Reference Manual

Search results

Summary of Contents for OmniBook 2100

Reviews:

Related manuals for OmniBook 2100

Brands by name

Popular brands