HP OmniBook 2100, Reference Manual

Page: 21 / 129

Introducing the OmniBook
Configuring the OmniBook with the BIOS Setup utility
1-13
Interrupt Sets the interrupt. IRQ5
1st DMA channel Sets the DMA channel for playback. DMA1
2nd DMA channel Sets the DMA channel for recording. DMA0
Security Menu Default
User Password Is Shows if a user password is set. Clear
Administrator Password Is Shows if an administrator password is set. Clear
Set User Password Press ENTER to set, change, or clear user
password. Password length can be no longer than
8 characters, 0-9, A-Z.
Set Administrator Password Press ENTER to set, change, or clear administrator
password. This password protects BIOS Setup
settings.
Boot Sets whether a user password is required when
the computer boots. Enabled
Resume* Sets whether a user password is required when
resuming from a suspended state. Enabled
Undock* Sets whether a user password is required when
undocking the OmniBook. Disabled
Internal Hard Disk Drive
Lock* Encodes the current user password (or
administrator password if that is the only
password set), on the primary hard disk drive. Disabled
Floppy Boot Sets whether the floppy drive is a boot device. Enabled
* Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is
enabled.