HP OmniBook 2100, Reference Manual

Page: 76 / 129

Making Connections
Using Docking Products
4-18
Using Docking Products
A docking product provides external connections for the OmniBook that you can
leave in place whenever you remove the OmniBook from your desk. Instead of
disconnecting and reconnecting peripheral devices, simply undock and dock the
OmniBook. This section describes how to
•
Install a docking tray.
•
Dock the OmniBook.
•
Undock the OmniBook.
For more information about using docking products, see the User’s Guide that
shipped with your dock.
To install a docking tray
Your dock requires a tray that accommodates your specific OmniBook model. Install
this tray prior to connecting the OmniBook to the dock.
1. Select the tray labeled for the OmniBook 2100.
2. Slide the rear of the tray into the dock as shown on the dock label.
3. Push down firmly on both sides of the tray until it snaps into place.
To remove a tray from the dock, pull the latch (near the center front of the dock)
towards you until the tray pops free.