HP Media Vault mv5020, User Manual

Page: 94 / 212

Version 6-86
The web browser displays The Welcome Page of the Administration
Console.
Connecting to the Media Vault from a Macintosh
You can configure a Macintosh computer to access the shared folders and
configuration screens on the HP Media Vault. These instructions apply only to
computers with the latest Macintosh OS X operating system.
To map shared folders from a Macintosh
1
In the Finder , click Go , Connect to server .
2
In the Connect to server dialog box, click Browse .
3
In the Network window, click WORKGROUP, HPMediaVault.
Note: WORKGROUP is the default name of the workgroup. If this name
has been changed, use the new name.
4
In the panel that shows the available shares, click Connect .
5
In the drop-down list on the Shared Volume window, select a shared
volume, then click OK .
6
In the SMB/CIFS File System Authentication window, enter the
password if it is required, and click OK .
7
Repeat steps 5 and 6 for each shared folder.
To access the HP Media Vault’s configuration screens
1
Open a web browser, such as Safari or Firefox.
2
In the Location box, enter the IP address or name of the server.
3
IP address example: http://192.168.1.101
4
Name example: http://HPMediaVault
Note: The IP address for the server can be found on your router's
configuration screens, usually under DHCP Client Table or Show
Connected Devices .
The web browser displays either The Welcome Page of the Administration
Console.