HP Media Vault mv5020, User Manual

Page: 124 / 212

Version 10-
116
This option formats the disk into a proprietary Linux file system (ext3).
Formatting the disk using this file system does not allow the disk to be
disconnected from the Media Vault and used on another computer.
The disk will be dedicated for permanent use on the Media Vault. This
format is suggested for best performance.
ƒ
Windows (FAT32)
This option formats the disk using the FAT32 file system. Formatting the
disk using this file system enables you to disconnect the hard drive
from the Media Vault and use it on another computer.
•
Status - Healthy
The drive is functioning properly.
•
Size
The total storage space on the disk.
•
Free
The amount of space available on the disk.
Adding an Internal Hard Drive
The HP Media Vault’s primary system hard disk uses the Serial ATA (SATA)
interface. The internal expansion bay accommodates a second SATA disk.
(The server does not support adding Integrated Drive Electronics (IDE) disks.)
Note: You should not remove or add a hard disk to the server while it is
powered on and running.
To add a hard drive to an expansion bay
1
Press the power button on the back of the Media Vault for about five
seconds and release it to turn off the server.
2
Open the door on the front of the Media Vault.