HP Media Vault mv5020, User Manual

Page: 167 / 212

12-
My HP Media Vault Loses its Router Settings
During the configuration of the HP Media Vault’s Remote Access, if you chose
Automatically Setup Router , and the Router has experienced a restart
or anything that would cause the router to lose power and/or restart, the
settings have been lost. The reason is that the settings are kept in volatile
memory, and are erased whenever the router loses power. You can avoid this
in the future by manually setting the router.
The steps below will assist in reconfiguring of the router.
1
At the computer, click Start , All Programs , HP Media Vault , and
then Control Center .
2
On the Tools tab, click Customize HP Media Vault .
You are prompted for an administrator name and password if you set one
up. For additional information, see Editing System Settings on page 2-26 .
3
Click the Remote Access tab.
Figure 51: The Remote Access Setup page after a personal web address is
created.
4
Click Set up Router .
The Remote Access Setup|Router Configuration page displays.