Bezel Blanks
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Remove the access panel (
Access Panel on page 121
).
2.
Remove the front bezel (
Front Bezel on page 122
)..
3.
To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards
the outer right edge of the bezel
(1)
and slide the bezel blank back and to the right to remove it
(2)
.
Figure 9-3
Removing a Bezel Blank
Bezel Blanks 123
Summary of Contents for Compaq 6005 Pro MT
Page 1: ...Maintenance Service Guide HP Compaq 6005 Pro Business PC ...
Page 4: ...iv About This Book ...
Page 12: ...xii ...