8.
Place the thermal sensor on top of the hard drive in a position that does not cover the label
(1)
and
attach the thermal sensor to the top of the hard drive with the adhesive strip
(2)
.
Figure 8-37
Replacing the Thermal Sensor
9.
Slide the cover on the carrier
(1)
and replace the screw on the rear of the carrier to secure the cover
in place
(2)
.
Figure 8-38
Replacing the Carrier Cover
10.
Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.
NOTE:
The carrier must be locked for power to be supplied to the hard drive.
Installing and Removing Drives 103
Summary of Contents for Compaq 6005 Pro MT
Page 1: ...Maintenance Service Guide HP Compaq 6005 Pro Business PC ...
Page 4: ...iv About This Book ...
Page 12: ...xii ...
