manualshive.com logo in svg

HP C4705A, User Manual

The HP C4705A User Manual is a comprehensive guide that provides step-by-step instructions for operating and maintaining the product. Easily accessible for download, this manual is available for free on our website, ensuring users have the necessary resources to maximize their experience with the HP C4705A.

Share
Download
background image

9-11

Company confidential.  Murillo/Ravillo User’s Guide.  Final   Freeze Status: Frozen

This is the cyan on page 9-11 (seq: 173)

This is the black on page 9-11 (seq: 173)

If the Output Contains Only a Partial Plot

Did you press 

Form Feed and Cut 

before all the data was received by the

plotter?  If so, you have ended the data transmission and will have to print the
plot again.  (You normally don’t need to press

 Form Feed and Cut

 to unload

the plot.)

The 

I/O Setup / I/O Timeout

 setting may be too short.  Increase the setting and

plot again.  See page 7-9.

The file may be too big for the plotter’s memory.   For information on memory
expansion modules, see page 11-14.

There may be a communications problem between your computer and the
plotter.  Make sure interface cable is connected properly.

Check to make sure that your software settings are correct for your current plot
size (e.g., long-axis plots).

If you are using network software, make sure it has not timed out.

See also under “If the plot is clipped” on page 9-12.

This is the magenta on page 9-11 (seq: 173)

TROUBLE-

SHOOTING

9

Troubleshooting

Solving Problems with Plot Position or Content

Summary of Contents for C4705A































































































































































































































Reviews:

No comments

Related manuals for C4705A

TE Connectivity AMS300 Operating Instructions Manual preview
AMS300
Brand: TE Connectivity Pages: 15

Brands by name

Popular brands

Load more brands