HP auroraTempo User Manual Download Page 149

Page: 149 / 300

Issue 1a - 10/99

5-69

Frame Relay Testing - Section 3

To set the time constant (Tc):

•

Highlight

Tc [sec]

and press the RIGHT arrow key to

display the

Tc [sec]

sub-menu.

•

Enter the time constant (Tc). This must be between 1
and 10.

•

Press ENTER to save and exit the

Tc [sec]

sub-menu.

The time constant is now displayed in the

Setup Test

Config

window.

Starting the test

•

Choose

Start Test

from the

Frame Load Test Config

menu. The test begins and the test results are displayed
in the

Test Results/Status

window. This display is as

follows :

Frms Tx

This is the number of frames
transmitted during the test.

This is the number of frames
received during the test.

Unknown

This is the number of unrecognised
frames received during the test.

Lost

This is the number of frames lost
during the test (gaps in the load
received represent the lost frames).

Err

This is the number of frames received
during the test which contain one or
more bits in error.

Summary of Contents for auroraTempo













































































































































































































































































































Search results

Summary of Contents for auroraTempo

Reviews:

Related manuals for auroraTempo

Brands by name

Popular brands

HP auroraTempo, User Manual

Search results

Summary of Contents for auroraTempo

Reviews:

Related manuals for auroraTempo

Brands by name

Popular brands