manualshive.com logo in svg

HP auroraTempo, User Manual

Share
Download
HP auroraTempo User Manual Download Page 139

Issue 1a - 10/99

 5-59

Frame Relay Testing - Section 3

Selecting a test to run

The 

Setup Test Config 

menu displays a list of tests which

can be performed on a DLCI. The tests are as follows:

CIR Test

Use this option to measure the
Committed Information Rate
(CIR)

CIR Receive Test

Use this option to measure the
amount of information it receives
from the far end.

Frame Load Test

Use this option to transmit frames
over the link.

Frame Receive Test

Use this option to analyze the
frames received over the link.

Frame Loop Test

Use this option to loop data for
either a particular interface or for
a particular DLCI.

Variable Load Test

Choose this option to test the
CIR values at both the receive
and  transmit ends of the
interface.

Ping Test

Use this option to generate IP
Ping.

Ping Receive Test

Use this option to receive IP
Ping.

Receive Throughput

Choose this option to test the

Test

CIR values at the receive end of
the interface.

Summary of Contents for auroraTempo













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands