manualshive.com logo in svg

HP auroraTempo, User Manual

Share
Download
HP auroraTempo User Manual Download Page 101

Frame Relay Testing - Section 1

Issue 1a - 10/99

   5-21

Low Layer Compatibility

Use this option to add a low layer compatibility
information element to the Call Setup message.

Low layer compatibility enables you to:

•

Add layer 2, layer 3, or both layer 2 and layer 3 octets
to the Low Layer Compatibility Information Element.

•

Choose the protocol used for layers 2 and 3.

•

If you choose a user specified protocol, to add a user-
defined value to the Information Element .

Choosing Low Layer Compatibility:

•

Highlight 

Low Layer Compatibility 

in the 

SVC

Configuration

 menu and press the RIGHT arrow

key to toggle between a tick (

✔

) or a cross (

✘

).

When a tick is selected a sub-menu is displayed with
further options.

L2 or L3 Protocol Present

Use this option to choose whether layer 2, layer 3 or
layer 2 and layer 3 octets are added to the Low Layer
Compatibility Information Element.

•

Highlight 

L2 Protocol Present

 or 

L3 Protocol

Present 

and press the RIGHT arrow key to toggle

between a tick (

✔

) or a cross (

✘

).

When a tick is displayed a layer 2 or layer 3 octet is
added to the Low Layer Compatibility Information
Element. This Information Element is added to the
Call Setup message.

Summary of Contents for auroraTempo













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands