HP auroraTempo, User Manual

Page: 152 / 300

aurora Tempo - User Guide
5-72 423972
• Press the RIGHT arrow key to display the
Frame
Count
sub-menu.
• Use the number keys to input the frame count. This
value must be within the given range or
*CHECK
RANGE*
is displayed. The default frame count is 0.
• Press ENTER to save and exit the
Frame Count
sub-
menu. The frame-count entered is now displayed in the
Setup Test Config
window.
Displaying Transit Delay Timestamps
Timestamps are used to calculate the transit delay - this is the
length of time taken for the frame to traverse the network.
To display transit delay information in the test results:
• Highlight
Timestamp
in the
Frame Receive Test
Config
menu.
• Press either ENTER or the RIGHT arrow key to
toggle between a tick (
✔ )
and a cross (
✘
). When a
tick is selected transit delay timestamps are
displayed in the test results and the
Setup Test
Config
window displays
Yes
in the
Timestamp
field.
Starting the test
• Choose
Start Test
from the
Frame Receive Test
Config
menu. The test begins and the test results
are displayed in the
Test Results/Status
window.
This display is as follows :
Rx
This is the number of frames
received during the test.
Unknown
This is the number of unrecognised
frames received during the test.
Lost
This is the number of frames lost
during the test (gaps in the load
received represent the lost frames).